NATIONAL INSTRUMENTS (NI) PXIe-5605 20Hz-14GHz DOWNCONVERTER *LOOK* (REF.: 1B1G)

Description

SHIPPING COSTS ARE IN NO WAY INCLUDED IN THE PURCHASE PRICE.
WE SHIP TO CANADA, USA AND MANY OTHER COUNTRIES
We encourage you to read THE FOLLOWING !!!
Please ask us for a shipping quote if you are interested in this item since the displayed shipping cost is an indication and is not accurate. We are obliged by Ebay to indicate a flat rate to list on Ebay.com since we are in Canada
There may be customs and/or customs brokerage charges. These charges are not included in the shipping costs and might be requested at delivery.
Taxes need to be added to Canadian Buyers !!!
PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION ENDING
NATIONAL INSTRUMENTS PXIe-5605
RF DOWNCONVERTER 20 Hz – 14GHz
UNIT IN GOOD WORKING CONDITION. 30 DAYS WARRANTY.
SEE PICTURES !!!
NATIONAL INSTRUMENTS PXIe-5605
FEATURES
;
The
National Instruments PXIe-5605
is a
Downconverter Module
. This module is known for its accuracy and industry-leading performance. The
NI PXIe-5605
can be used as part of the
PXIe-5665 RF Vector Signal Analyzer
, along with the
PXIe-5653 Analog Signal Generator
and
PXIe-5622 IF Digitizer
.
Reach out to Select-Test.com for further assistance.
The
NI PXIe-5605
offers up to -165 dBm/Hz average noise level at a 1 GHz carrier frequency and phase noise of -129 dBc/Hz. With this module, you can employ NI-RFSA to control IF filtering automatically. In addition, manual selection of IF filters is possible.
The
NI PXIe-5605
supports three types of IF bandpass filters: 5 MHz, 300 kHz, and
Through.
At -6 dB, the
Through IP bandpass filter
offers 80 MHz (nominal) bandwidth.
Reach out to Select-Test.com for further assistance.
When the unit operates with pre-selector enabled, the Through bandpass filter functions at 47 MHz typical limited bandwidth. The 5 MHz filter offers 5 MHz (nominal bandwidth) at – 3 dB and offers a nominal output IF frequency of 190 MHz, whereas the 300 kHz filter offers 199 MHz (nominal) IF output frequency at – 3 dB.
The
National Instruments PXIe-5605 RF Signal Downconverter Module
comes with one RF IN connector, one IF OUT connector, one LO1 IN connector, one LO2 IN connector, one LO3 IN connector, and three connectors for LO OUT (LO1 OUT, LO2 OUT, LO3 OUT).
Reach out to Select-Test.com for further assistance.
This module comes with an external DC block, since it can be used with an SMA DC block. This block is used at the RF IN connector and protects the device in the presence of the DC signal.
PLEASE HAVE A LOOK AT THE OTHER LISTED ITEMS WE HAVE AVAILABLE ON EBAY BY
CLICKING HERE
LOOK AT PICTURES!!!
WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL OBTAIN
UNITS MAY NOT BE CALIBRATED AND / OR MAY NOT HAVE RECENT CALIBRATION UNLESS NOTED.
BUYERS IN CANADA WILL BE SUBJECT TO GST AND PST DEPENDING ON THE PROVINCE
RESTRICTIONS ON SHIPPING APPLY TO INDONESIA, NIGERIA, IRAN, NORTH KOREA, IRAQ & AFGHANISTAN.
PLEASE NOTE WE CAN SHIP VIA YOUR CHOICE OF COURRIERS.
DO NOT BASE YOURSELF ON THE EBAY SHIPPING COST. IT USUALLY DOESN'T REFLECT REALITY.
DO NOT SEND MONEY UNTIL WE HAVE PROCEEDED TO CHECK OUT AND HAVE CALCULATED SHIPPING OURSELVES
THERE IS A .00 PACKAGING CHARGE ON ANY ITEM BEING SOLD FOR LESS THAN 0
You can use the following dimensions to get an idea of the shipping costs;
BOX SIZE
15 INCHES X 15 INCHES X 10 INCHES
Weight = 5 lbs
Unit to be shipped from Postal Code (equivalent of Zip Code): H1E 5Y8